Economically priced Friction Ball Lock Rings for Differential Shafts
Rimor now offer economically priced ball lock rings to suit a range of core sizes from 2” to 12”, in a range of widths, allowing the winding of web widths as narrow as 10mm. The range of rings are used on our range of Differential Shafts, for slit differential winding which can be supplied alongside our tension control systems utilising either load cell or Ultrasonic measurement supplied by our partners Boschert & Haehne. We also offer a range of economical Mechanical shafts and chucks utilising a similar system to provide an Airless solution for roll winding & unwinding.
Boschert Safety Chucks – Free Safety Check
Today the Boschert Safety Chuck is an industry standard worldwide, having being in production for over 60 years. Due to the quality of these Safety chucks, many of them have been in service for quite a few of these years.
As safety is paramount within our industry, Rimor would like to offer a free Safety Check assessment at your site by our Boschert trained engineers, to check the safe operation of the chucks. Should parts be found to be worn we can then provide the parts to replace them or carry out a complete refurbishment at our site. Please call us now to arrange an on-site assessment.
New Ultra-Lightweight Extruded Air Shaft
Following the continued success of Rimor’s 3” Ultra-Lightweight Extruded Airshaft, Rimor have released a new design, the 2009 Series. Compared to its predecessor, the re-designed extrusion improves rigidity whilst also reducing the overall shaft weight by utilising our latest journal design. A typical 1000mm long 2003 Series Airshaft would amass to 8.3kg, however, the new 2009 Series Airshaft would weigh in at 6.6kg, providing a weight reduction of over 20%! The 2009 Series 3” Ultra-Lightweight Airshaft is particularly useful in the packaging industry where the reduced shaft weight allows heavier reels to be used thus extending time between changeovers. The high strength design also reduces the need for expensive Carbon Fibre Airshafts in certain applications. The new design compliments our range of Lightweight Con-Ex Extruded Airshafts suitable for 3”, 4” and 6” ID cores.
Air Shaft Repair Service
In recent years, in the UK there has been a reduction of manufacturers of Airshafts and ancillary equipment. However, after over 30 years Rimor still remains as strong as ever in the industry. This allows us to offer a fast and cost effective repair and overhaul service for all types and makes of Air Shafts, without the need of expensive shipping charges to Europe. Our comprehensive stock range enables us to repair and refurbish almost any Airshaft and Roller, which in many cases can be done within 48 hours. So please feel free to contact us before returning any manufacturers Airshafts or Chucks to Rimor and we will do the rest!
Innovative Pillow Block Web Tension Bearing
As UK agents for HAEHNE, Rimor Converting are pleased to offer an additional product to the comprehensive range of Tension Control & Tension measuring equipment that we supply.
HAEHNE has integrated a tension measuring function into the inner bearing component of the Pillow Block. The Pillow block contains a double beam technology system with the well-known advantages of a high accuracy and linearity.
The Pillow Block Web Tension Bearing BZL is compatible with common Pedestal bearings INA/FAG (PASE12/15/17) and NTN/SNR (UC201/202/203). The range is available in both horizontal and vertical measuring direction and covers the nominal forces of 100, 200, 500 and 1000N and with an accuracy of over 0.5%.
Tailored Force Measurement Bolts from Haehne
Individually tailored Force measurement bolts or load pins are suitable for retrofits or new builds to monitor force measurement in various parts of machinery. For over 20 years HAEHNE has been offering a comprehensive standard product of measurement pins which can be limiting to the designer or customer. For this reason HAEHNE have developed an individual system for tailored force measurement bolts which will exactly suit the customer’s application.
Using the request form on the Rimor website, customers can now submit his requirements through Fax or Email to Rimor who will supply a drawing and quotation for the unique part. “We hope that through this individual offer we become more responsive to our customer requirements” says Fred Goronzy, Senior President of the HAEHNE Company. “Customers and interested companies are invited to try out our new offer.”
For further details and to view our comprehensive range of on-site manufactured Airshafts and Chucks, with supporting products from our partners including Boschert, Haefne, alum-a-lict Tilt-Lock, then please visit our website at www.rimorconverting.co.uk or call our Sales team on 02392 264063.